How To Wire Ring Doorbell

If you’re looking to secure your house with a Ring Doorbell, then you’re in the right place. In this article, we’ll show you how to wire Ring Doorbell. It’s a simple process that can be done by anyone, with no prior electrical knowledge. Let’s dive right in!

Step 1: Check the Voltage

Before you start wiring, you need to check the voltage of your existing doorbell. The Ring Doorbell requires a voltage of 8-24 volts AC. If your doorbell’s voltage is less than 8 volts, you’ll need to upgrade your transformer. If it’s more than 24 volts, you’ll need to install a resistor.

Step 2: Turn Off the Power

Before you start working on the wiring, make sure to turn off the power to your doorbell. You can do this by turning off the circuit breaker or removing the fuse that powers the doorbell circuit.

Step 3: Remove the Old Doorbell

Remove the screws that hold the old doorbell in place and gently pull it away from the wall. You’ll see two wires connected to the back of the doorbell. These are the wires you’ll need to connect to your Ring Doorbell.

Step 4: Connect the Wires to the Ring Doorbell

Connect the wires to the back of the Ring Doorbell. The white wire goes to the “Front” terminal, and the black wire goes to the “Trans” terminal. Use a screwdriver to tighten the screws and secure the wires in place.

Step 5: Attach the Ring Doorbell to the Wall

Once you’ve connected the wires, it’s time to attach the Ring Doorbell to the wall. Use the screws that came with the Ring Doorbell to attach it to the wall. Make sure it’s level and secure.

Step 6: Turn the Power Back On

Now that everything is connected, turn the power back on to your doorbell circuit. Your Ring Doorbell should now be powered up and ready to use.

FAQs about How to Wire Ring Doorbell

1. Can I install the Ring Doorbell without wiring?

No, the Ring Doorbell needs to be wired to your doorbell circuit to function properly.

2. Can I use a wireless doorbell with the Ring Doorbell?

No, the Ring Doorbell is not compatible with wireless doorbells.

3. Do I need to hire an electrician to wire my Ring Doorbell?

No, you don’t need to hire an electrician. The wiring process is simple and can be done by anyone.

4. Can I install the Ring Doorbell myself?

Yes, you can install the Ring Doorbell yourself. Just follow the steps outlined in this article.


Wiring a Ring Doorbell is a simple process that can be done by anyone. Just make sure to check the voltage of your existing doorbell, turn off the power, connect the wires to the Ring Doorbell, attach it to the wall, and turn the power back on. With these simple steps, you’ll be able to enjoy the security and convenience of a Ring Doorbell.