Step 1: Turn Off the Peloton Bike
Before you start removing the Peloton screen, make sure the bike is turned off. This will prevent any damage from occurring to the screen or the bike.
Step 2: Remove the Power Cord
After turning off the bike, unplug the power cord from the outlet. This will ensure that there is no electricity flowing through the bike while you’re working on it.
Step 3: Remove the Screen
To remove the Peloton screen, you’ll need to remove the screws on the back of the screen. Use a screwdriver to carefully remove each screw, being sure not to strip the screws or damage the screen.
Step 4: Disconnect the Cables
Once you’ve removed the screws, you’ll need to disconnect the cables that are connected to the back of the screen. Use your fingers to gently unplug each cable, being careful not to damage the connectors.
Step 5: Remove the Screen from the Bike
After you’ve disconnected the cables, carefully remove the screen from the bike. Be sure to hold the screen securely so that it doesn’t fall or get damaged.
What tools do I need to remove the Peloton screen?
To remove the Peloton screen, you’ll need a screwdriver.
Can I remove the screen without disconnecting the cables?
No, you’ll need to disconnect the cables before removing the screen.
How long does it take to remove the Peloton screen?
The process of removing the Peloton screen should take around 10-15 minutes.
Removing the Peloton screen may seem intimidating at first, but it’s a simple process that can be done in just a few steps. By following our guide, you’ll be able to remove the screen safely and easily. Remember to take your time and be careful not to damage the screen or the bike.